["Drone_Frame Function-FPV Whoop","Drone_Frame Other Accessories-Does not apply","Drone_Frame Part-Spare Parts","Drone_Frame Size-Does not apply","Drone_Frame Video-Does not apply"]
The Goober canopy was made for maximum protection on your BeeBrain Lite board, and looking great with a stream-line stingray inspired shape.
The canopy uses a neck collar that goes around the BeeEye camera and screws into place holding it securely together to hold up to tough impacts and crashes. A front cap covers the top of the camera lens to help make sure front impacts resist hitting your lens, or as we like to call it "the dad hat".
PLEASE NOTE: This canopy was designed to fit and work with the BeeEye camera. This is NOT a universal canopy and may not work with other micro FPV cameras. By buying this camera mount, you agree that we cannot guarantee fitment with other cameras. Returns will not be accepted for fitment issues with other cameras.
This 4 cell LiHv is great for flying slow and for long flight times on my 6 cell drone. Even though it's not the correct cell count, the LiHv 4.35 max voltage brings it closer into range.
I am kinda new to fpv drone flying but not new to RC and this radio is by far the best I’ve used. Definitely complicated and has a lot to lean but its loaded with features and is fully customizable and way more advanced then anything Ive used before. Coming from the Spektrum platform YouTube is your friend as there is a lot to learn.
had a few issues i used they ROBO 1002 and it fit fine without they carbon. but needs they carbon to hold battery had to use a mix of screws, had issues with props rubbing they frame with carbon using AZI props solved by not pressing props all the way down. I ordered they black and yellow, Black has a better mount for they antenna to keep in place !! yellow needs something to tie down
this gift would be nicer with a genuine properly welded whoop
Hello Franz,Thank you for the information provided. Do you have a hot air soldering station? You can use it to heat the capacitor, which should allow you to reseat it into position. After that, test to see if it's functioning properly within Betaflight. If everything is working correctly, you can further secure the capacitor with non-conductive adhesive.We sincerely apologize for the inconvenience caused. We have also credited your account with $10, which you can use to purchase any products from our store. If you have any questions or need further assistance, please feel free to reach out to us. We are always here to help. Thank you, NewBeeDrone Support